austenitic
英[ˌɔːstəˈnɪtɪk]
美[ˌɔːstəˈnɪtɪk]
双语例句
- 1. Initially these alloys were austenitic.
- 最初,这些合金为奥氏体合金。
youdao
- 2. Examples of such materials are: austenitic stainless steels.
- 例如材料是奥氏体不锈钢。
youdao
- 3. Austenitic stainless steel designates the basic material in Table 1.
- 奥氏体不锈钢类指表1中所列基本材料。
youdao
- 4. The relations of metallography and remains austenitic to bearing's life.
- 轴承工作表面的金相组织和残余奥氏体对寿命的影响。
youdao
- 5. The low temperature fracture mechanism of high manganese austenitic steels is studied.
- 研究了高锰奥氏体钢的低温断裂机制。
youdao
- 6. Austenitic stainless steel including clad plate shall generally be subjected to cold forming.
- 奥氏体不锈钢包括包装板通常使用冷成型。
youdao
- 7. The stress corrosion cracking of metastable austenitic stainless steel has been investigated.
- 研究了亚稳态奥氏体不锈钢的应力腐蚀开裂。
youdao
- 8. The technology for tightness improvement of the Ni austenitic cast iron cable head is studied.
- 分析了提高镍奥氏体铸铁电缆插头铸件致密性的工艺方案。
youdao
- 9. The influence of different pretreatment process on the austenitic essence grain was studied too.
- 本文还研究了不同预处理工艺对奥氏体本质晶粒度的影响。
youdao
- 10. We shall conduct the clean water for the hydrostatic test of the austenitic stainless steel pipe.
- 我们将为奥氏体不锈钢管的水压试验引进净水。
youdao
- 11. Mainly used for welding different type of steel and clad steel or similar kind of austenitic steel.
- 主要用于异种钢或复合钢的焊接或用于焊接相应成分的奥式体钢。
youdao
- 12. Hot extrusion is the advanced production process for high-performance austenitic stainless steel pipes.
- 热挤压是优质高性能奥氏体不锈钢管材的先进生产工艺。
youdao
- 13. The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
- 研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
youdao
- 14. Nitrogen alloyed austenitic steels showed excellent ballistic property, higher than that of martensite steel.
- 含氮奥氏体钢具有优良的抗弹性能,并优于传统马氏体钢的抗弹性能。
youdao
- 15. This paper studied the effect of nitrogen on the corrosion resistance of 316l austenitic stainless steels (SSs).
- 本文研究了氮对316l奥氏体不锈钢耐蚀性影响及其作用机理。
youdao
- 16. These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials.
- 这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
youdao
- 17. The steam leakage was occurred on the welding zone of the tube sheet of the austenitic stainless steel heat exchanger.
- 在奥氏体不锈钢制再沸器的上管板与壳程筒体焊接的管板一侧发生蒸气泄漏。
youdao
- 18. The tensile properties, deformed microstructure and fracture at 77K in high-Mn austenitic steels have been investigated.
- 研究了高锰奥氏体钢在77K下的抗拉性能、形变组织和断裂特点。
youdao
- 19. Investigation showed that, in this new nickel cast iron, besides graphite and austenitic base, had yet alloying cementite.
- 研究表明:在这种新型镍铸铁中除了石墨和奥氏体基体外,还有合金渗碳体存在;
youdao
- 20. The degradation behavior of an austenitic stainless steel used at high temperatures was studied by the electrochemical method.
- 利用电化学方法研究了高温中使用的奥氏体不锈钢的高温损伤行为。
youdao
- 21. On the basis of systematical study, the comprehensive effects of alloying elements in cryogenic austenitic steels were analyzed.
- 在系统研究结果的基础上,分析总结了低温奥氏体钢中合金元素的综合作用。
youdao
- 22. Establishing a passive surface or film on austenitic SS is essential to maximize the corrosion resistance that the metals offer.
- 在铬镍不锈钢表面形成一个钝化的表面或膜是非常重要的,它可以将材料的抗腐蚀性提高到最大。
youdao
- 23. The welding metallurgical characteristics and weldability of duplex ferritic-austenitic stainless steels were studied in this paper.
- 本文就铁素体-奥氏体双相不锈钢的焊接冶金特性和焊接性进行了研究。
youdao
- 24. The concept of super austenitic stainless steel appeared with super ferrite stainless steel and super double phases stainless steel together.
- 超级奥氏体不锈钢的概念是与超级铁素体不锈钢及超级双相不锈钢一起出现的。
youdao
- 25. The influence of aluminum on the content and morphology of ferrite and toughness of chromium-nickel austenitic stainless steel welds is discussed.
- 本文研究了铬镍奥氏体焊缝中铝对铁素体含量和形态的影响及其与焊缝韧性的关系。
youdao
- 26. The influences of deformation rate on the mechanical properties of 304 austenitic stainless steel were studied by tensile test at room temperature.
- 采用室温拉伸实验研究了不同变形速度对304奥氏体不锈钢力学性能的影响规律。
youdao
- 27. In this paper the effect of alloyed modification for carbon content, carbide shape and distribution in austenitic manganese steel has been studied.
- 研究了合金化变质改性对提高奥氏体锰钢基体碳含量,改变析出碳化物形态及分布的影响。
youdao
- 28. Where austenitic bolting materials have been carbide solution treated but not strain hardened, they are designated Class 1 or Class 1a in ASTM A193.
- 在此,奥氏体螺栓材料经过碳化溶液的处理,但是没有经过应变硬化,因此归在ASTMA193的类别1或类别1a。
youdao
- 29. Where austenitic bolting materials have been carbide solution treated but not strain hardened, they are designated Class 1 or Class 1a in ASTM A193.
- 在此,奥氏体螺栓材料经过碳化溶液的处理,但是没有经过应变硬化,因此归在ASTMA193的类别1或类别1a。
youdao
百度翻译
有道翻译