cross-slide的中文翻译

cross-slide

英[] 美[]

n. 横向滑板；横拖板

双语例句

1. In the using of type C3163 turret lathe in our plant, the hand rocking axle gear in the cross-slide was often broken.: C3163型六角车床在我厂使用过程中，横溜板箱手摇轴齿轮经常打坏齿。

2. During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.: 在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。

3. We changed the original cross slide track.: 由原来的十字滑道。

4. The procedure followed in such cases involves complete disengagement of the cross slide from the carriage, which is then guided by the taper-turning attachment.: 在这种场合下要遵循的步骤是将横向滑板完全脱离大拖板，然后通过锥面车削附加装置进行引导。

5. The steel plate on top of it is the cross slide ways.: 在它的顶部钢板是交叉幻灯片的方法。

6. The axial feed is provided by the carriage or the compound rest, either manually or automatically, whereas the depth of cut is controlled by the cross slide.: 轴向进给通过大拖板或复式刀架手动或自动提供，然而切削深度则由横向滑板控制。

7. Unusually deep front to back for a small lathe the saddle carried an almost boring-table sized T-slotted cross slide fitted with a "bridge bracket" at the front.: 非常深刻的前向后一小车床进行鞍几乎镗表大小的T型槽交叉幻灯片装有“桥梁支架”在前面。

8. High - precise mechanism such as turnover mechanical hardware and cross slide plate mechanism, etc., are employed.: 采用机械翻板机构及交叉滑板机构等高精度的测量机构，满足了使用要求。

9. The burnout and wear procedure of cross slide way of 4L-20/9-II coke-oven gas compressor was presented and the burnout and wear causes were seriously analyzed.: 阐述了4L-20/9-Ⅱ型焦炉煤气压缩机十字头滑道频繁烧研的过程，并对烧研原因进行了认真分析。

10. This is the cross slide feed screw and two homemade setscrew collars.: 这是两岸幻灯片feedscrew和两个自制固定螺丝的衣领。

11. This is the cross slide feed screw and two homemade setscrew collars.: 这是两岸幻灯片feedscrew和两个自制固定螺丝的衣领。

百度翻译

cross-slide的意思

有道翻译

cross-slide的翻译

相关单词