flanges
英[ˈflændʒɪz]
美[ˈflændʒəz]
双语例句
- 1. Push the back onto the radiator flanges.
- 将插回到散热器法兰上。
youdao
- 2. Rubber faced or mechanical flanges are not recommended.
- 建议不要使用橡胶表面或机械法兰。
youdao
- 3. Close all blind flanges, inspection holes and manholes.
- 关闭所有盲法兰盖、并检查各个孔和人孔。
youdao
- 4. The engine-feed system interface is at the turbopump inlet flanges.
- 发动机与供应系统的交界是在涡轮泵的进口法兰盘处。
youdao
- 5. The engine-feed system interface is at the turbopump inlet flanges .
- 发动机与供应系统的交界是在涡轮泵的进口法兰盘处。
youdao
- 6. When bolting to steel flanges, longer bolts or stud may be required.
- 如果是应用在钢法兰晌，可能需要更长的螺栓或双头螺栓。
youdao
- 7. Large diameter Steel Flanges. Series A. Conforms to related dimensions.
- 大通径钢法兰。系列a。符合相关尺寸标准。
youdao
- 8. Technology: flange type of heating is heating pipe welding flanges from fixed.
- 工艺：法兰式加热管是由加热管与法兰焊接固定而成。
youdao
- 9. Carbon Steel Flanges and Fittings, 150 lb. Conforms to related flange drilling.
- 碳钢法兰和连接件，150磅，符合相关法兰钻孔尺寸标准。
youdao
- 10. The gasket faces of girth flanges shall be machined after final heat treatment.
- 在最终热处理后翼缘法兰的垫片的端面应进行加工。
youdao
- 11. Class 250 cast iron and Class 300 steel flanges can not be used on these valves.
- 在这些阀门上不能使用250磅级铸铁和300磅级钢法兰。
youdao
- 12. Technology: flange type of heating is heating pipe and welding flanges from fixed.
- 工艺：法兰式加热管是由加热管与法兰焊接固定而成。
youdao
- 13. Adjust windshield glass position until it is aligned with the flanges and adhesive.
- 调整挡风玻璃位置直至与凸缘和粘结剂对准。
youdao
- 14. This latter functional sulcus determines the extension limit of the denture flanges.
- 后者，也就是功能性沟决定了基托的伸展范围。
youdao
- 15. If not, a specially designed tool will be used to pry apart the top and bottom flanges.
- 如果螺栓无法拆卸，将使用一种专门设计的工具把上下法兰盘撬开。
youdao
- 16. Wide variety of mounting flanges, shafts, and displacement provides design flexibility.
- 可灵活选择不同的安装法兰，输出轴，排量。
youdao
- 17. Shipbuilding. shaft lines. couplings. forged flanges for assembly to taper - bore flanges.
- 造船工业。轴线。联轴节。装配镗圆锥孔凸缘的锻接法兰。
youdao
- 18. Cast Iron Pipe Flanges and Flanges Fittings, 125 LBS. Conforms to related flange drilling.
- 铸铁管道法兰和法兰连接件，125磅，符合相关法兰钻孔尺寸标准。
youdao
- 19. The ends have two flanges that allow you to easily depress the spring to install or remove.
- 两端有两个法兰盘，让您轻松地抑制弹簧安装或删除。
youdao
- 20. When installing the pipeline with flange, the gasket must be placed between the two butt flanges.
- 安装带法兰的管路时，必须在两个对接法兰的密封间放置垫片。
youdao
- 21. The effect of flanges restraint on the web in castellated beams under uniform moment is analyzed.
- 最后进行在弯矩作用下蜂窝梁翼缘对腹板的约束作用分析。
youdao
- 22. A. N. S. I. Standard b16.1-covers cast iron pipe flanges and flanged fittings (Class 125 and 250).
- 标准B16.1 -包括铸铁管道法兰和法兰连接件(125磅级和250磅级)。
youdao
- 23. We are producing machining parts, CNC Precision machining, covering axles, tubes, flanges and others.
- 我们现正制作加工部件，数控精密加工，包括车轴，管，法兰等。
youdao
- 24. These bearing types also feature two flanges on the inner ring but only one flange on the outer ring.
- 这些类型的轴承还具有两个内圈，但只有一个外圈法兰法兰。
youdao
- 25. Remove the old sleeve by bending the flanges at one end and withdrawing the sleeve from the other end.
- 要拆卸旧套管，要通过弯曲法兰的一端，然后将套管从另一端抽出来。
youdao
- 26. Rolling flanges should conform to Appendix A (standard appendix), and be selected according toTableA1, A2.
- 轧制法兰应符合附录A（标准的附录）的规定，并按表A1，A2选用。
youdao
- 27. Adopting "pipeline flange quick plugging jacket" is able to resolve the leakage between companion flanges.
- 采用“管道法兰快速堵漏夹套”可以解决法兰片之间的堵漏。
youdao
- 28. Adopting "pipeline flange quick plugging jacket" is able to resolve the leakage between companion flanges.
- 采用“管道法兰快速堵漏夹套”可以解决法兰片之间的堵漏。
youdao
百度翻译
有道翻译