forward-bearing
英[]
美[]
双语例句
- 1. Oblivious, Hattie would march steadily forward, and I felt like I was waving out the back window of an automobile that was bearing me away.
- 海蒂一点儿没注意到,还是稳步向前,我觉得自己像在一辆载着我离去的汽车中从后窗向外挥手。
youdao
- 2. This paper introduced a few of failure forms of babbit glide bearing, analysed the reasons for this, then put forward some preventive measures in aspect of manufacturing, installation and using.
- 介绍了巴氏合金滑动轴承轴瓦常见的几种失效形式,分析了其产生的原因,并从轴瓦的制造、安装、使用等几方面提出了防范措施。
youdao
- 3. The casing is thus free to yield to thermal expansion by moving forward on special slide elements between the front-end brackets and the front bearing pedetal.
- 外壳通过位于前端支架和前轴承座之间的特殊滑动部件向前滑动,从而避免了热膨胀的影响。
youdao
- 4. A new structural project of the bearing turntable for the radar antenna is put forward in this paper.
- 提出一种全新的雷达天线方位转台结构方案。
youdao
- 5. The principles and the development of active magnetic bearing (AMB), passive magnetic bearing (PMB), hybrid magnetic bearing (HMB), and their applications in industries are put forward.
- 本文系统介绍了主动、被动、混合式磁力轴承的工作原理、工作特点及其在工业实际中的应用。
youdao
- 6. The types of roller bearing are introduced and it's characteristics are analysed. Meanwhile, improving ways of backing bearing are put forward and it's service life is extended.
- 简要介绍轧辊轴承类型,分析其特点,提出了支承辊轴承的改进方法,延长了它的使用寿命。
youdao
- 7. The author puts forward: using uncoupling algorithm, optimal predictive algorithm based on DSP hardware, it can promote the percent of pass, bearing, rolling drum.
- 笔者提出:采用解耦算法,最优预估控制算法,以dsp为核心硬件,提高球团矿的合格率、抗压率、转鼓率。
youdao
- 8. This paper explores forms of failure in liquid hydrostatic bearing, analyzes their causes and puts forward measures to solve them.
- 本文探讨了液体静压轴承的失效形式,分析了失效原因以及提出了解决的措施。
youdao
- 9. Pointing at problems produced in grinding process of bearing rings with double raceways, the dynamic control grinding process method is put forward.
- 针对双滚道滚动轴承套圈磨削加工过程中存在的问题,提出了动态控制磨削加工法。
youdao
- 10. With analysis of structure of cone roller bearing inner ring forgings, corresponding improvement on original forging technology has been put forward.
- 分析圆锥滚子轴承内圈锻件结构,对原锻造工艺中的不足提出了相应的工艺改进措施。
youdao
- 11. The great bearing interval was regarded as optimum time, and optimum method for plus tree selection was put forward by the analytical results.
- 提出了以定期结实年数和定期结实枝平均生长量为标准的优树选择方法。
youdao
- 12. Based on terrain characteristics of transmission lines, this paper compares existing cableway types and put forward working cable arrangement that adopts dual bearing cable and single pulling cable.
- 文章根据输电线路地形特点,对比了现有几种索道形式以后,提出适合输电线路建设的双承重索、单牵引索的工作索布置方案。
youdao
- 13. Comes to the conclusion that the hybrid bearing can be used to the liquid rocket engine turbopump, and then puts forward the key technique to be solved.
- 得出了液体动静压滑动轴承可用于液体火箭发动机涡轮泵转子支撑的结论,同时提出了待解决的关键技术。
youdao
- 14. The main structure parameters of the damper bearing are put forward.
- 提出了阻尼轴承的主要结构参数及其确定方法;
youdao
- 15. The paper puts forward the strengthening method of enlarging the joint section, proposes the relative calculating formula of the joint bearing capacity and provides a calculating example.
- 文章提出了仅节点区增大截面的加固方法,并建议相应的节点承载力计算公式,最后给出了一个算例。
youdao
- 16. By analyzing the key processes of bearing ring, the principle of delaying raceway failure is discussed, at the same time some methods of solving problem on technology is put forward.
- 通过对轴承套圈关键工序的分析,探讨了延缓滚道失效的原理,同时提出了几种在工艺过程中解决问题的方法。
youdao
- 17. The design and structure of the drawing tool for the engine bearing sleeve inside channel is discussed, the drawing technique introduced and the related points put forward.
- 论述了发动机轴承衬套油线拉制工具的设计及其结构,介绍了油线拉制的方法,并提出了有关注意事项。
youdao
- 18. A new lettering technology is put forward based on the electrochemical dissolving principle of anode, and the equipment for lettering is designed and lettering on bearing is tested.
- 利用电化学阳极溶解原理,提出一种新型脉冲电化学光亮刻字技术,设计了工装,并以轴承为例进行了刻字试验。
youdao
- 19. As to the problems of bearing disable, the mend method on seal structure of the screw conveyer for powder materiel is put forward, and the applied effect is demonstrated.
- 针对粉状物料螺旋输送机轴承损坏问题,提出了轴承密封结构的改进措施,说明了改进后的应用效果。
youdao
- 20. The core zone bearing capacity formulas of two types of joints based on the tests are brought forward respectively according to the tests.
- 根据实验结果对两种类型的节点提出了基于实验研究的节点核芯区承载力公式;
youdao
- 21. The thermo equilibrium conditions of thrust magnetic bearing with solid magnet are analyzed and the improved quantitative calculation rules are brought forward.
- 对实心磁铁推力磁轴承热平衡条件进行了分析,提出了改进的轴承温度场估算方法。
youdao
- 22. The positive pressure distribution on the bearing surface of screw down system of 950 primary mill was studied using FEM and the corresponding improvement way has been put forward.
- 通过有限元分析,研究了950开坯机压下系统球面轴承表面正压力的分布情况,并据此提出了相应的改进措施。
youdao
- 23. The calculation methods of bearing capacity and settlement and testing methods of CFG and lime piles composite foundation are put forward.
- 同时介绍了cfg桩和石灰桩形成的多元复合地基的承载力和沉降的计算方法及检测方法。
youdao
- 24. According to the principle of effective stress, this paper puts forward the theoretical basis for determining foundation's bearing capacity, presents the rational calculation method.
- 根据有效应力原理,提出了确定地基承载力的理论依据,给出了合理的计算方法。
youdao
- 25. This paper analyzes vibration signals of rolling element bearing in time-domain and frequency-domain, and puts forward the characteristic parameters to reflect the level of vibration and noise.
- 分别从时域和频域的角度分析了滚动轴承的振动信号,提出了反映滚动轴承振动水平和噪声水平的各种特征参数。
youdao
- 26. Therefore, it makes the test and the structural safe appraisal for the bearing capacity of this pedestrian overpass and puts forward two options: removal and consolidation.
- 为此,对该人行天桥进行承载力测试和结构安全评估,提出拆除和加固两个方案。
youdao
- 27. Aimed at these problems, this paper puts forward a new isolation bearing which is composed of polysaccharides slide, elbow block, brace, connecting poles and high elastic damping rubber dampers.
- 针对这些问题,提出一种新型减隔震支座,它是由聚四氟乙烯滑板、肘块、支柱和高弹性阻尼橡胶体通过连杆连接而成。
youdao
- 28. Trough analysing the reason of oil leakage in bearing box of induced draft fan, a new kind of mechanical magnetic oil seal is put forward to prevent oil leakage of induced draft fan.
- 通过对引风机常见轴承箱漏油原因的分析,提出了一种防止引风机漏油的新机械磁力油封结构。
youdao
- 29. According to the theory of bearing capacity of environment, the new quantitative analysis method of bearing capacity of ecological environment is put forward.
- 从环境承载力有关理论出发,提出了一种探索生态环境承载力的新方法。
youdao
- 30. According to the theory of bearing capacity of environment, the new quantitative analysis method of bearing capacity of ecological environment is put forward.
- 从环境承载力有关理论出发,提出了一种探索生态环境承载力的新方法。
youdao
百度翻译
有道翻译