interpass
英[ɪntəˈpɑːs]
美[]
双语例句
- 1. The upper limit of the qualification is the highest interpass temperature reached in the welding procedure test.
- 合格鉴定的上限为焊接工艺试验时达到的最高层间温度。
youdao
- 2. The preheating and interpass temperatures are 25 ~ 50c. Tensile and impact properties of the joints are almost the same as that of the matrix.
- 预热温度及层间温度控制在25 ~50为宜，接头拉伸和冲击性能与母材相匹配。
youdao
- 3. No preheating is required for P8 material in general. For the correct preheating and interpass temperatures, please refer to corresponding WPS.
- 对于P 8材料，一般不需要预热，关于正确的预热和层间温度的要求，参见相应的WPS。
youdao
- 4. In welding process, the over range of the interpass temperature can be avoided by the control of heat treatment equipment and by the check of the far-infrared temperature instrument.
- 并指出焊接过程中层间温度的控制，在用热处理控制柜自动控制的同时，再采用便携式远红外测温仪对层间温度进行校核，可以避免层间温度超标现象。
youdao
- 5. The proper interpass temperature is required to prevent cold and hot cracking as well as the proper selection of welding filler material, to produce the proper creep resistance and toughness.
- 需要适当的程间温度和正确选择填充金属材料来防止冷热裂缝，产生适当的蠕变阻力和韧性。
youdao
- 6. The proper interpass temperature is required to prevent cold and hot cracking as well as the proper selection of welding filler material, to produce the proper creep resistance and toughness.
- 需要适当的程间温度和正确选择填充金属材料来防止冷热裂缝，产生适当的蠕变阻力和韧性。
youdao
百度翻译
有道翻译