nozzles
英[]
美[]
- n. [航][机]喷嘴;接管(nozzle 的复数)
双语例句
- 1. What about the area of the thrust nozzles?
- 喷嘴面积是多少?
youdao
- 2. In practice, the turbine disc and the nozzles are fitted into a casing.
- 实际上,涡轮圆盘和喷嘴是装在机壳里的。
youdao
- 3. Thoroughly clean nozzles dust up to 99%, extend the lifespan of nozzle.
- 清洗更彻底,直接延长吸嘴寿命,清洗率99%以上。
youdao
- 4. I noticed a woman on the factory floor putting nozzles onto rubber hoses.
- 我注意到一位女士在车间里正往塑料软管上装喷嘴。
youdao
- 5. Captain: Here you are. We need 5 shackles, 3 valves, 10 nozzles and 5 bearings.
- 船长:给您。我们需要5个卸扣、3个阀门、10个喷嘴和5个轴承。
youdao
- 6. D. The material - radian size and injection plastic machine nozzles radian match.
- 主进料口弧度尺寸与注塑机喷嘴弧度相配。
youdao
- 7. Air atomizing nozzles are especially suited to the atomization of viscous liquids.
- 空气雾化喷嘴特别适用于粘性液体的雾化。
youdao
- 8. Window cleaning tube with inject nozzles to be fitted on top of wheelhouse Windows.
- 在驾驶室窗顶部安装清洗窗户的管子和喷头。
youdao
- 9. May make routine changes of dies, nozzles or other machinery attachments as required.
- 可按照要求进行模具,喷嘴或其它机械附件的常规改变。
youdao
- 10. First the machine takes off and hovers above the ground by firing downward-facing nozzles.
- 首先这种机器启动后加热朝下的喷嘴,会在地上盘旋。
youdao
- 11. Chevrons are the sawtooth pattern seen on the trailing edges of some jet engine nozzles.
- Chevrons是见于某些喷气式发动机喷口后缘的锯齿状构型。
youdao
- 12. A study for determining plastic limit moment of nozzles in cylindrical vessels is presented.
- 对圆柱形容器在接管外载荷作用下的塑性极限载荷进行了研究。
youdao
- 13. A study for determining plastic limit moment of nozzles in cylindrical vessels was presented.
- 对圆柱形容器在接管外载荷作用下的塑性极限载荷进行了研究。
youdao
- 14. Furthermore, some related topics about nozzles design and engineering also have been discussed.
- 另外,本文还讨论了新型喷管设计理论、思路和工程化等相关问题。
youdao
- 15. We want to buy Nozzles, Hoses, Coupling and Flexible Expansion Joints Bellows and Expansion Joints.
- 我们要采购喷嘴,水管,联结和有柔性的扩充连接风箱。
youdao
- 16. The entire drive module glows cherry red with radiant heat, and the exhaust nozzles are almost white.
- 整个动力装置闪耀着樱桃红并辐射出剧热,排气口也几乎变白。
youdao
- 17. To go forward, he pushes down slightly on the handlebars, angling the nozzles to a maximum of 45 degrees.
- 想要向前飞行,只需将手把向下轻推,将喷口倾斜,最大角度为45度。
youdao
- 18. Second, we used to find out the intersect lines of shell and nozzles by the means of projection transform.
- 二是以往通常用投影转换的方法来求得筒体和接管的相贯线,这种方法放样困难、繁复且精度不高。
youdao
- 19. Gaskets, bolts and nuts for blind nozzles and manholes shall be as specified in Purchaser's drawing or data sheet.
- 盲设备口及人孔所用的垫片、螺栓及螺母在买方图纸或数据表中指定。
youdao
- 20. Experts say this helps to keep the inkjet nozzles open and reduces the need for maintenance and maintenance cycles.
- 专家说,这样有助于保持喷嘴处于打开状态,减少维护需求和周期。
youdao
- 21. Each device consists of a single, retractable lance and a drive mechanism equipped with separate air and water nozzles.
- 每一套设备都包括有单根可伸缩杆和一个带有单独的空气通道和水喷嘴的驱动机械。
youdao
- 22. Lechler air atomizing nozzles utilize a collision of metered air and liquid to provide the finest atomization of liquid.
- 我们生产的空气雾化喷嘴使用定量空气和流体的碰撞来产生最精细的雾化液体。
youdao
- 23. All pipe lines, valves, and nozzles shall be isolated from the atmosphere by a blank, pipe cap, or plug when not being used.
- 当不在操作使用时,所有管线、阀门、和喷嘴应用盲板、管帽、或塞子使其和大气隔开。
youdao
- 24. The main space in the train cars is taken up by the steam generator with various valves, nozzles, manometers and a huge furnace.
- 这辆车头的主要部分都被一台蒸汽机占据着,蒸汽机有一堆的阀门,喷口,压力计和庞大的火炉
youdao
- 25. As nozzles expel the pearly material, layer by layer, you imagine the elaborate designs this device could make on gingerbread cookies.
- 当喷嘴层层喷洒这些珍珠粉般的物质时,你大可以想象这台机器将如何在姜饼上面绘制精美的图案。
youdao
- 26. Nozzles for level gauge and other long projection nozzles shall be reinforced by bars of suitable size to resist bending moment on nozzles.
- 液面计及其它长颈设备口应使用适当尺寸的条棒进行加固以防止设备口挠矩。
youdao
- 27. Clean: 12 nozzles at one time. it can clean all types of nozzles by using different nozzle trays. Compressed air blow to make nozzles dray.
- 清洗:机器全自动清洗,每次可清洗12个吸嘴,不同型号的吸嘴配备不同的治具托盘,任何型号贴片机吸嘴都可以清洗,清洗以后在用压缩空气干燥。
youdao
- 28. Clean: 12 nozzles at one time. it can clean all types of nozzles by using different nozzle trays. Compressed air blow to make nozzles dray.
- 清洗:机器全自动清洗,每次可清洗12个吸嘴,不同型号的吸嘴配备不同的治具托盘,任何型号贴片机吸嘴都可以清洗,清洗以后在用压缩空气干燥。
youdao
百度翻译
有道翻译