setscrews
英[ˈsetskruː]
美[ˈsetˌskrʊ]
双语例句
- 1. Many times (as with pinion gears) you will need to remove small setscrews (typically 3mm) that have been tightened as much as possible.
- 很多时候(与小齿轮)，你将需要删除的小定位螺丝(通常为3毫米)已拧紧尽可能。
youdao
- 2. At one end of the inner ring, the bearing is clamped to the shaft with an eccentric locking ring (Figure 1.7) or with two setscrews (Figure 1.8).
- 在内圈的一端，轴承通过偏心锁定环(图1.7)或者两个定位螺钉(图1.8)被固定在轴上。
youdao
- 3. Trying to remove these setscrews with a hex wrench (aka Allen wrench) that is the wrong size or even slightly worn will very likely strip the drive cup of the setscrew.
- 试图删除这些固定螺钉用内六角扳手（也称为内六角扳手），这是错误的大小，甚至轻微磨损很可能会剥离驱动杯的固定螺丝的。
youdao
- 4. Trying to remove these setscrews with a hex wrench (aka Allen wrench) that is the wrong size or even slightly worn will very likely strip the drive cup of the setscrew.
- 试图删除这些固定螺钉用内六角扳手（也称为内六角扳手），这是错误的大小，甚至轻微磨损很可能会剥离驱动杯的固定螺丝的。
youdao
百度翻译
有道翻译