tundish
英[ˈtʌnˌdɪʃ]
美[ˈtʌndɪʃ]
- n. 中间包;浇注盘(等于 pouring box)
双语例句
- 1. The critical highness of slag entrapment was gained in tundish.
- 同时确定了中间包卷渣的临界高度。
youdao
- 2. The generation of swirling flow in a centrifugal tundish is studied.
- 研究离心中间包离心室旋流发生的方法。
youdao
- 3. Argon blowing in tundish is a new technology for production of clean steel.
- 中间包吹氩是适应洁净钢冶炼的新技术、新方法。
youdao
- 4. Inspecting the effect of tundish and the tundish flux on removal of inclusion.
- 检验中间包及中间包覆盖剂对夹杂去除效果的影响。
youdao
- 5. These include the turbulence inhibiting pouring pad and centrifugal flow tundish.
- 其中包括设置湍流控制器和应用离心中间包。
youdao
- 6. The influence of turbulence inhibitor on flow field in tundish has been studied by water modeling.
- 通过水力学模型实验,研究了中间包内流体流动的特性。
youdao
- 7. The dissertation mainly introduces the research and development work of Ladle-Tundish slag detection.
- 本论文主要介绍了连铸钢包到中间包的下渣检测方法的研究工作。
youdao
- 8. The tundish metallurgy played an important role in purifying molten steel and stabilizing CC operation.
- 连铸中间包在最后净化钢水和稳定连铸的操作中起重要作用。
youdao
- 9. The inclusion behavior in the tundish with a lime filter was investigated through the industrial trials.
- 通过工业试验研究了中间包内安装石灰过滤器后钢液中夹杂物的行为。
youdao
- 10. The quality and life of the tundish nozzle directly affect the purity of steel before entering into mold.
- 中间包水口的质量和寿命直接影响着钢在进入结晶器前的纯净度。
youdao
- 11. Technologies of rapid replacement of sizing nozzle and longevity of continuous casting tundish were presented.
- 介绍了连铸中间包定径水口快速更换与中间包长寿技术。
youdao
- 12. The distribution of fluid temperature in the tundish during plasma heating is investigated with water modeling.
- 采用水模在线加热研究等离子加热中间包流体温度的分布。
youdao
- 13. The dynamics of purifying the liquid steel by centrifugal flow tundish was studied through physical simulation.
- 采用物理模拟的方法,对离心中间包净化钢液的动力学进行了考察。
youdao
- 14. Tundish-cover nodulizing process can reduce the smoke and dust effectively and the pollution of the atmosphere.
- 盖包法可以有效减少烟尘的排出,减少对大气的污染;
youdao
- 15. The flow control devices of tundish for ingot casting has been optimized through hydraulics simulated experiment.
- 通过水力学模拟实验,优化了模铸连浇中间包控流装置。
youdao
- 16. This paper introduces water model experiments of molten steel flow field in tundish and its practical application.
- 介绍根据安钢三炼钢条件进行的钢水中间包流场水力模型实验及其应用。
youdao
- 17. The influence of eddying flow control trough on flowing liquid in tundish is researched through water simulating test.
- 通过水模试验研究了涡流控流槽对连铸中间包流体流动的影响。
youdao
- 18. This paper made a data statistic and technologic analysis for the causes of inducing nozzle clogging in tundish of CC.
- 本文对主要影响连铸中间罐水口堵塞的原因进行了数据统计的工艺分析。
youdao
- 19. By the inference-resisting advantage of PLC, this paper gives a design which can improve the control of the tundish car.
- 利用P LC自身抗干扰的优点,本文给出一种设计方案,改进了中间罐车的控制。
youdao
- 20. The new technologies include tundish metallurgy, quick-change tundish, steel stream control in mould and soft reduction etc.
- 采用的新技术包括中间罐冶金、中间罐快速更换,结晶器内钢水流动控制、轻压下等工艺。
youdao
- 21. The paper analyzes characteristics of tundish refractory, and raises suitable baking rules of CCM tundish in casting process.
- 文章对中包用耐火材料的特点进行了分析,提出适合连铸工艺生产的中包烘烤制度。
youdao
- 22. This essay discusses the significance of continuous casting tundish heating introducing the characteristic of heating methods.
- 论述了中间包加热的重义,介绍了感应加热、电弧或等离子加热等方法的特点。
youdao
- 23. The advantages and executive processes as well as the service condition of alkalinous dry lining of tundish have been introduced.
- 简要介绍中间包碱性工作衬的优点、施工工艺及在板坯连铸机中间包上的使用情况。
youdao
- 24. The bottom blowing solution was put forward to solve the temperature accumulation in the plasma heating zone in a six-strand tundish.
- 针对宝钢六流连铸中间包等离子加热区域温度积聚严重的现象,提出了底吹气的解决方法。
youdao
- 25. The influence of turbulence inhibitors with different structure on fluid flow behavior in tundish was studied by water modeling experiments.
- 通过水力学模型实验,研究了不同结构的湍流控制装置对中间包流体流动特性的影响。
youdao
- 26. Molten steel flow field in tundish nozzle and influence of some factors on deposition rate were researched by method of numerical simulation.
- 采用数值模拟方法,对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。
youdao
- 27. Influences of some additions for the sintering characters of magnesium dry coating in tundish were researched and compared as well as analyzed.
- 研究了几种加入物对中间包用镁质干式涂料烧结性能的影响,并进行了比较和分析。
youdao
- 28. Absorption of inclusions to slag, steel reoxidation by slag, and protective effect of the slag at ladle, continuous tundish and nold are discussed.
- 讨论了钢包、中间包及连铸结晶器所用渣相对夹杂物的吸附,对钢水的氧化,以及保护浇注的效果。
youdao
- 29. Water nozzle clogging of tundish is analyzed, and in order to reduce water nozzle clogging and improve the quality of steel, countermeasure is discussed.
- 对中间包水口堵塞进行了分析,讨论了为减少水口堵塞和提高钢质量而采取的对策。
youdao
- 30. Water nozzle clogging of tundish is analyzed, and in order to reduce water nozzle clogging and improve the quality of steel, countermeasure is discussed.
- 对中间包水口堵塞进行了分析,讨论了为减少水口堵塞和提高钢质量而采取的对策。
youdao
百度翻译
有道翻译