weldability的中文翻译

weldability

英[weldəˈbɪləti] 美[weldəˈbɪlɪti]

n. [机] 焊接性；[机] 可焊性

双语例句

1. The crack sensibility is one important content in steel weldability.: 裂纹敏感性是钢的焊接性的重要内容之一。

2. The performance and weldability of industrial pure titanium were recommended.: 介绍了工业纯钛的特性及焊接性。

3. Good impact and abrasion resistance. Excellent gas cutting property and weldability.: 良好的抗冲击耐磨性，很好的可气割性和可焊接性。

4. The paper investigates the weldability of D36 HSLA steel used for heavy crane beams.: 研究了重型吊车梁用D36低合金高强钢的焊接性。

5. The weldability of high strength steel for railway vehicle produced by Baosteel was studied.: 研究了宝钢高强度铁道车辆用钢的焊接性。

6. As the steel grade improved, the requirements for toughness and weldability are also enhanced.: 随着管材强度级别的提高，对管材的韧性、焊接性等性能要求也进一步提高。

7. It power boasts excellent machinability, high corrosion resistance, gond weldability and conductivity.: 具有极佳的成型加工特性，高耐腐蚀性、良好的焊接性和导电性。

8. This article conducts a research on the weldability of crystal diode lead wire luminous electrotinning.: 本文对晶体二极管引线光亮电镀锡的可焊性进行了研究。

9. This paper studies the effect of zinc and shielding gas type on Laser weldability of zinc-coated steels.: 本文研究了锌对镀锌板激光焊接性影响，以及不同保护气体对镀锌板焊接性的影响。

10. The paper points out, that both joint strength and weldability should be considered, while selecting welds.: 并指出对焊缝的选择，既要考虑连接强度，又要考虑加工的可能性。

11. The weldability of the 2205 duplex stainless steel were investigated and the key welding technique was introduced.: 对2205双相不锈钢的焊接性能进行了研究分析，对材料的焊接技术关键进行了介绍。

12. The weldability of metal is introduced in the thesis, also the factors of affecting the weldability of metal are analyzed.: 论文对金属焊接性进行了介绍，并对金属焊接性的影响因素进行了分析。

13. The results show that the steel has superior weldability, low cold-cracking sensitivity and good weather corrosion resistance.: 试验结果表明，该钢具有优异的焊接性能、较低的焊接冷裂纹敏感性和良好的耐大气腐蚀性能。

14. The paper assessed the procedure weldability of T23(P23) steel, which offers great help to the applications of T23(P23) steel.: 本文对T23（P23）钢的工艺焊接性进行评价，有助于该钢种的应用。

15. The welding metallurgical characteristics and weldability of duplex ferritic-austenitic stainless steels were studied in this paper.: 本文就铁素体-奥氏体双相不锈钢的焊接冶金特性和焊接性进行了研究。

16. Based on the analysing weldability of the alloy, the welding method, material and procedure are chosen and the alloy plates are welded.: 在合金焊接性分析的基础上，探讨了相应的焊接方法、焊接材料和焊接工艺措施，并进行了试板的焊接。

17. An autogenous weld is produced by GTAW and can be used to test material weldability and gas shield usage, and to set welding parameters.: 可以用氩弧焊(GTAW)制备气焊缝，这种焊接方法可以用来测试材料的可焊接性，检查气体保护的使用以及焊接参数的设定。

18. The results show that the defects in the weld such as interface reactant and pore are the key factors to reduce the material weldability.: 研究发现，焊缝中存在的界面反应物、气孔缺陷，是导致该种材料焊接性显著降低的主要因素。

19. Tin deposits obtained have strengths such as bright and uniform appearance, good coherence and weldability, Low cost and high efficiency.: 所得锡镀层光亮细致、结合力强、可焊性好、生产成本低、效率高。

20. The test result show, it possess higher crack resistance, satisfactory weldability, and im-prove mechanical properties of the welded joint.: 结果表明，它有较高的抗裂性和良好的焊接性，并能提高焊接接头的机械性能。

21. Based on the analysis of influential factors of high-strength steel weldability, the article introduces ways of choosing welding technique.: 通过对高强钢焊接性影响因素的分析，论述了如何合理选择焊接工艺。

22. Expert system of metal weldability estimate based on knowledge base is put forward according to analysis of metal weldability characteristic.: 从分析金属焊接性的特点出发，提出了基于知识库的金属焊接性评价专家系统。

23. By analyzing the weldability of beat resistant austenitic stainless steel, the procedures and precautions are proposed for welding the steel.: 通过对奥氏体耐热不锈钢的焊接性分析，提出奥氏体耐热不锈钢焊接应采取的焊接工艺及应注意的问题。

24. The argon arc welding process after replacement of intercooler cooling section was presented. The welding feature and weldability were analyzed.: 介绍了中冷器抽换散热单节的氩弧焊接工艺，分析了中冷器抽换散热单节的焊接特点以及焊接性。

25. The necessity for welding crane rails is analyzed; weldability discussed and welding procedure worked out. The product is successfully welded, too.: 论述了起重机轨道焊接的必要性，分析了其焊接性，拟定了焊接工艺并成功地焊接了产品。

26. In this paper, the present research on the surface modified the weldability of ceramic materials during brazing and diffusion welding was reviewed.: 综述了表面改性在陶瓷钎焊和扩散焊领域应用的研究现状，并展望了表面改性技术在材料焊接领域的应用前景。

27. The results show that the steel has excellent weldability, the joints have not only high strength, but also sufficient plasticities and ductilities.: 结果表明，该超高强钢的焊接性良好，不仅接头强度高，而且塑性仍保持很高水平。

28. Based on the special weldability of big diameter stainless steel pipe complete welding, puts forward the more reasonable welding process and operational method.: 大直径不锈钢管的全位置焊接，根据其特殊的焊接性，提出较合理的焊接工艺和操作方法。

29. High strength, toughness, weldability and low temperature toughness is also widely used in the manufacture of Bridges, boilers, ships and other large structures.: 强度较高，且韧性、焊接性及低温韧性也较好，被广泛用于制造桥梁、锅炉、船舶等大型结构。

30. High strength, toughness, weldability and low temperature toughness is also widely used in the manufacture of Bridges, boilers, ships and other large structures.: 强度较高，且韧性、焊接性及低温韧性也较好，被广泛用于制造桥梁、锅炉、船舶等大型结构。

百度翻译

weldability的意思

有道翻译

weldability的翻译

相关单词